PCB Router Machine with Manual Bit Change, Dual Vacuum Blow System, and Two Workstations

1. Two-slide PCB Separator

2. Low stress

3. Sharp cutting edge

4. Manul loading /unloading

5. High speed cutting by 4 axes control

6. Easy teaching with image processing

Setting Fixture : 2 stations
Working Area : X: 320mm, Y: 320mm, Z: 60mm
Cutting Area : Max: X: 320mm, Y: 320mm　Min: X: 100mm, Y: 100mm Z: 15mm
PCB Component Height : Top side: 15mm Bottom side: 45mm(with specific jig)
PCB Thickness : 0.5 to 3.0 mm
Router Bit Diameter : 0.8 ~ 2.0 mm(Option: Over 2.0mm)
Precision of Cutting : ± 0.10 mm
Positioning Accuracy : ± 0.01mm
Positioning Repeatability : ± 0.02mm
Number of Axis in use : 7 Axis (X, YL, YR, Z, Carry, P/P, Conveyor).
Driving Speed (Max) : X, YL, YR : 1000mm/sec, Z: 750mm/sec
Cutting Speed (Max) : X, Y, Z: 100mm/sec (It’s according to the specification of Bit for the best speed setting )
Spindle Motor : High speed variable frequency motor 150W (Max.50,000rpm)
Bit Change : Manual
Cutting Ability : Linear, Circular, U-curve, Arc, L-curve
Motor of Axis : 7 Axes (150W AC Servo motors)
Bit Shift Count : Max. 2
Route Planning : Direct coordinate input or manual guiding with × 10 CCD camera
Safety Area Sensor : n/a
Bit Break Detection : Standard
Program Storage : HDD
Program Backup : USB
Operating System : Windows 7
Man-Machine Interface : Touchscreen Industrial Monitor + Keyboard + Mouse
Conveyor Adjustment : Manual adjustment Max: Y: 350mm　Min: Y: 100mm
Conveyor load capacity : Max: 2 Kg
PCB Loading/Unloading : Automatic
Power Supply : 3 Phase AC220V±3% 50Hz/ 60Hz, 3.5 kw
Air : 0.5Mpa
Dimensions : (W)2002mm x (D)1279mm x (H)1716mm + 578mm signal tower
Weight : approx. 500 Kg