Low-Maintenance Automatic PCB Router Machine with High-Resolution CCD Video Camera

The Automatic PCB Router Machine utilizes a routing bit in three segments—2mm for initial milling, 2mm for secondary milling, and 2mm for final finishing—to significantly extend the tool’s overall lifespan.

Features

X10 Zoom-In Imaging: The system provides 10x image magnification, making programming easier and improving the accuracy of point setting.

Dual Sliding Tables: Equipped with two sliding tables that allow simultaneous loading and unloading, significantly reducing takt time and enhancing productivity.

Auto MARK Offset System: The CCD camera can detect MARK points and simulate cutting paths in advance, minimizing the risk of errors before actual routing.

Routing Bit Lifetime Monitoring & Alarm: The machine features a tool life detection system that alerts the operator to replace the routing bit after 120 meters of cutting.

Three-Stage Bit Utilization: The routing bit is used in three segments—first 2mm for initial milling, middle 2mm for secondary milling, and final 2mm for finishing—to extend overall tool life.

Path Simulation with CCD: The CCD imaging system checks and simulates routing paths before cutting, ensuring high accuracy and reducing potential mistakes.

Specification

Model	CW-F04
Standard working area	450*350mm
Power	220V, 4.2KW
Manipulator Repeatability	±0.02mm
Resolution	±0.01mm
Board Positioning	Dual workstation with nest fixture or pin fixture
Panel Location	Located by tooling holes or edges of PCB
Loading	Manual
Unloading	Manual
Panel Size	450*350mm
Panel Thickness	0.5-3.5mm
Spindle motor	0.5kW Morning Star Spindle
Tool Change	Manual
Dust filtration system	3KW Vacuum Cleaner
Vision system	High resolution CCD video camera
Programming	Vision assisted point to point manual teaching
Editing Function	Dry run vision assisted / test run mode
Machine weight	500kgs
Machine dimension	113140108cm