Stand-Alone CNC PCB Router Machine with 0.01mm Repeatable Positioning Accuracy

This stand-alone PCB router machine is specifically designed to depanelize printed circuit board assemblies (PCBAs) into individual units. Featuring a dual-table configuration, it accommodates larger PCBs with a maximum panel size of 650mm x 500mm. Its advanced control software offers a user-friendly, visual programming interface, enabling fast and precise online programming.

Features

1. Manual loading/unloading processing

2. 2-way sliding working exchanger to limit the idle time and simultaneously loading and unloading to reaches the utmost output value.

3. Friendly touch panel with 10X CCD camera to minimize the time of programming

4. Auto fiducial mark point check and cutting route auto compensation to ensure the cutting accuracy

5. Auto router bit check to prevent the bit break incomplete cutting.

Specification

Model	CW-F01-S
Standard working area	320*320mm
Power	220V, 4.2KW
Manipulator Repeatability	±0.02mm
Resolution	±0.01mm
Board Positioning	Dual workstation with nest fixture or pin fixture
Panel Location	Located by tooling holes or edges of PCB
Loading	Manual
Unloading	Manual
Panel Size	320*320mm(standard)
Panel Thickness	0.5-3.5mm
Spindle motor	KAVO Spindle
Tool Change	Manual
Dust filtration system	3KW Vacuum Cleaner
Vision system	High resolution CCD video camera
Programming	Vision assisted point to point manual teaching
Editing Function	Dry run vision assisted / test run mode
Machine weight	500kgs
Machine dimension	113140108cm